Water play area
Key Attributes
Age Group
4+
Area of Use
Public Playgrounds
Activity
Manual
Suitable for
Suitable for
children from 4 years,
public playgrounds etc.,
manual activities
Techincal Specifications
Lifting Device
-
Total Length
5.35 m
Total Width
2.85 m
Total Height
1.60 m
Minimum Space Length
8.35 m
Minimum Space Width
5.85 m
Minimum Space Height
1.60 m
Heaviest Single Piece
65.00 kg
(Total) Weight
445.00 kg
Free Height of Fall
0.90 m
Platform Heights
0.40 m
Foundations
Foundation 1
6 pieces - 0.40 x 0.40 x 0.40 m volume: 0.07 m3
Foundation 2
3 pieces - 0.50 x 0.50 x 0.50 m volume: 0.13 m3
Foundation 3
1 piece - 0.70 x 0.50 x 0.50 m volume: 0.18 m3
Foundation 4
-
Foundation 5
-
Foundation 6
-
Assembly
Number of Installers
2 pers.
Assembly Time
2 h
Assembly Details
Assembly time 2 fitters each 1.5 hours (without foundation creation, without water connection)
Technical Data
Technical data
Floor area: 2.85 x 5.35 m
Minimum space: 5.80 x 8.35 m (37 m²)
Total height: 1.60 m
Platform height: 0.40 m
Weight: 65 kg Heaviest individual part
445 kg in total
Support
post Support post made of Robinia plywood, milled cylindrically, Ø 120 mm. Unprotected end grain surfaces are covered with non-detachable post caps made of stainless steel.
Support posts that are flush with the platform are not provided with post caps.
Pipe stand made of stainless steel for the foundation and mounting of robinia round wood posts, Ø 120 mm, below the playing level.
Platform
floor Platform floor made of boards, 30 mm thick and all-round square timber beams 45 x 100 mm. The dried robinia lumber is planed, chamfered and free from rotten branches. Non-positive floor fastening thanks to special stainless steel brackets with a continuous bolt connection.
Pump platform also with profiled stainless steel sheet.
Attachments
– Step railing made of stainless steel tube, Ø 33.7 x 2 mm
K&K water pump Article No. 0-33130-001
Water pump for direct connection to a water pipe, suction pipe connection 1 ¼ inch (pipe diameter at least ¾ inch)
Welded stainless steel construction, encapsulated pump housing, pump mechanics with roller and slide bearings, upper pump housing with handle must e.g. during the Frost period to be removed.
Please note:
When connecting the water pump to a pressurized water line, the K&K valve combination (Art.No. 0-33190-000) is required.
If the water supply is intended to be temporarily interrupted (timer or similar), a negative pressure builds up in the line system when the pump continues to be operated, which causes the pump handle to kick back.
It is therefore imperative to prevent actuation of the pump handle (for example by using the pump lock item number 1040639).
In doing so, also observe the general data specified in the assembly instructions (distances, diameter of the lines, etc.); You can get these on request from K&K or directly as a PDF from our website at www.kaiser-kuehne-play.com.
K&K water distribution table (0.50) Article No. 0-33480-000
Welded stainless steel construction with 2 water drainage pipes . Rubber cone closure with lock for complete water withdrawal. Tube Ø 38 mm.
K&K water channel 2.40 m / water wheel 0.60 m
Welded stainless steel construction with elevation and water channel. Sheet thickness: min. 2 mm. Water wheel consisting of 12 blades, bevelled flat on the front side and enclosed by side walls. Wheel bearings with roller bearings.
Including storage flap, freely positionable, handle made of stainless steel, sheet made of rubber with fabric insert.
K&K water channel 1.60 m
Welded stainless steel construction with elevation and water channel. Sheet thickness: min. 2 mm.
K&K mud plate (0.50) Article No. 0-33451-000
Welded stainless steel construction with 6 water drainage openings . Sheet thickness: min. 2 mm, pipe Ø 38 mm. Anchoring on the flange ring.
A suitable ring foundation (15165) for anchoring on the flange ring and shaped stones (15170) for building up walls and leveling differences in height or for a secure foundation in loose fall protection (sand, fine gravel, etc.) can be supplied at an additional cost.
Metal components: stainless steel.
The robinia wood is provided with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking. The modular add-on parts introduce their forces directly into the support posts via a special adapter attachment. The screw connections are secured against unauthorized loosening with cover caps.
Foundations (on site)
6 pcs. 0.40 x 0.40 x 0.40 m
3 pcs. 0.50 x 0.50 x 0.50 m
1 pc. 0.50 x 0.70 x 0.50 m
amount of concrete: 1.01 m³
Free fall height
0.90 m