Water play area

2+

Supervised Playgrounds

Manual

Suitable for
children from 2 years,
supervised playgrounds etc.,
manual activities

-

3.95 m

2.80 m

3.00 m

6.95 m

6.00 m

3.00 m

105.00 kg

560.00 kg

1.20 m

0.80 m, 1.20 m

8 pieces - 0.40 x 0.40 x 0.40 m volume: 0.07 m3

1 pieces - 0.50 x 0.50 x 0.50 m volume: 0.13 m3

-

-

-

-

2 pers.

3 h

Assembly time 2 fitters each 3 hours (without foundation creation, without water connection)

Technical data
Base area: 2.80 x 3.95 m
Minimum space: 6.00 x 6.95 m (34 m²)
Total height: 3.00 m
Platform height: 0.80 / 1.20 m
Weight: 105 kg Heaviest individual part
560 kg in total

Support
post Support post made of Robinia plywood, milled cylindrically, Ø 120 mm. Unprotected end grain surfaces are covered with non-detachable post caps made of stainless steel.
Pipe stand made of stainless steel for the foundation and mounting of robinia round wood posts, Ø 120 mm, below the playing level.

Platform
floor Platform floor made of boards, 30 mm thick and all-round square timber beams 45 x 100 mm. The dried robinia lumber is planed, chamfered and free from rotten branches. Non-positive floor fastening thanks to special stainless steel brackets with a continuous bolt connection.

Attachment parts – railing, anti-roll-off, made of stainless steel tube, Ø 33.7 x 2 mm
– climbing rungs (cranked) made of stainless steel tube, Ø 33.7 x 2 mm
– half tent roof, inclination 45 °, made of highly weather-resistant HPL laminate board (brown), 13 mm, attachment to the roof frame made of stainless steel tube Ø 33.7 x 2 mm
– wood balustrade made of robinia, 125 x 30 mm, attachment between stainless steel tubes Ø 33.7 x 2 mm
– lattice balustrade made of stainless steel tube, Ø 33.7 x 2/25 x 2 mm , one-piece welded construction

K&K conveyor
basin solitary RS 120 Welded stainless steel construction with mounting device for the foot bearing of the water spiral, water inlet directly below or above the pipe ring, sheet metal thickness 2 mm / pipe Ø 33.7 mm.
A suitable ring foundation (15168) for anchoring on the flange ring and shaped stones (15169) for building up walls and leveling out differences in height or for a secure foundation in loose fall protection (sand, fine gravel, etc.) can be supplied at an additional cost.

K&K water
spiral (2.00) hand wheel drive and turntable at the top Spiral length : 2.00 m Outside
diameter: 0.25 m
Welded stainless steel construction with roller bearings, foot bearing for screwing on.

K&K catch basin modular RS120
Welded stainless steel construction for water intake with a water drainage opening , sheet thickness 2 mm / pipe Ø 33.7 mm.

K&K Gargoyle Article No. 0-33125-000
Welded stainless steel construction, clamp part for attachment to pipe Ø 38 mm, with connection element suitable for connecting a garden hose with hose section 1/2 ″ or 3/4 ″. (e.g. Gardena® or comparable).

K&K water table (0.50)
Base: 0.84 x 1.84 m
Total height: 0.65 m
Welded stainless steel construction with 1 water drainage pipe. Rubber cone closure with lock for complete water withdrawal. 4 shelves. Sheet thickness: 2 mm / tube Ø 38 mm. Anchoring on the flange ring.
Suitable ring foundations (15165) for anchoring on the flange ring and shaped stones (15170) for building up walls and compensating for differences in height can be supplied at an additional cost.

K&K water channel M5 1.60 m
welded stainless steel construction. Sheet thickness: 2 mm / tube Ø 38 mm. With 1 connection for ES / RS posts, with stepless inclination for installation for the required gradient for the inlet and outlet of the water through additional elevation.
Including freely positionable storage flap, handle made of stainless steel, sheet made of rubber with fabric insert.

K&K terrace shell with 1 drain
Base area: Ø 0.90 m
Total height: 0.14 m
Welded stainless steel construction with water drainage opening, sheet thickness: 2 mm / pipe Ø 33.7 mm.

Metal components: stainless steel.
The robinia wood is provided with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking. The modular add-on parts introduce their forces directly into the support posts via a special adapter attachment. The screw connections are secured against unauthorized loosening with cover caps.

Foundations (on site)
8 pcs. 0.40 x 0.40 x 0.40 m
1 pc. 0.50 x 0.50 x 0.50 m
amount of concrete: 0.7 m³

Free fall height
1.20 m