Play Combination “Wagon Cobb & Co.”

Play Combination “Wagon Cobb & Co.”

Combination “Coach Cobb&Co.” Play Set
Order Number: SK-201123-01-en
Material: Robinia wood

– Galloping Play Horse:
– Four legs made of stainless steel tube, with a diameter of 101.6mm. Three legs are angled and three are extended with a stainless steel tube with a diameter of 38mm.
– One stainless steel tube, approximately 75cm long, serves as the body with a handle.
– One stainless steel rung acts as a step.
– One horse head made of stainless steel.

– Rising Play Horse:
– Four legs made of stainless steel, with a diameter of 101.6mm. Two legs are angled and extended with a stainless steel tube with a diameter of 38mm.
– One stainless steel tube, approximately 75cm long, serves as the body with two handles.
– One stainless steel rung acts as a step.
– One climbing net made of Hercules rope.
– One horse head made of stainless steel.
– Two ropes, approximately 200cm long, made of Hercules rope.

– Wagon:
– One flat roof made of red HPL.
– Six box-shaped posts made of stainless steel, measuring 100x100mm.
– Six walls made of HPL, two of which feature the “COBB & Co.” design.
– One square platform, approximately 180x150cm, with a height of 80cm.
– Two inclined stainless steel tubes.
– Two HPL wheels with a frame made of stainless steel tube.
– One ladder.
– One climbing net made of Hercules rope, with a width of 150cm.
– One ramp with a rope made of Hercules rope for climbing support.
– Four ropes made of Hercules rope.
– One square platform, approximately 180x150cm, with a height of 100cm.
– Two HPL wheels with a frame made of stainless steel tube, with a diameter of 76mm.
– One stainless steel sheet as a roof, with two stainless steel tubes with a diameter of 38mm.
– One sand chute.
– One pulley with a stainless steel chain and rubber bucket.
– One Spiel-Bau slide made of stainless steel, with a width of approximately 100cm.

Made in Germany!
All support posts are made of stainless steel. The visible ends of the posts are conclusively welded to a stainless steel cap.
All stainless steel surfaces are radiated with glass marbles in accordance with environmental protection rules.
All wooden parts are made of planed and chamfered Robinia wood. They are untreated.
The connection between the platform/railing and support posts is made through stainless steel press-in threaded sleeves.
The platform is fixed using concentrically incorporated stainless steel brackets.
The connection point between the net/rope and support posts is made through specifically formed stainless steel forks and tensible stainless steel chains.
The nets are made of Hercules rope. All connecting parts are made of stainless steel or galvanized. Only self-locking nuts are used.

Drying cracks are normal in all native hardwoods, even after appropriate storage and professional treatment. Therefore, drying cracks do not justify a warranty claim. (Refer to the supplementary sheet for the German Institute for Standardization EN 1176, Note on 4.2.7.6)