Kobito sand kitchen “Tomi”

Kobito sand kitchen “Tomi”

Kobito Sand Kitchen Tomi
An arch constructed from stainless steel and wood made from robinia.

– One stainless steel arch with a width of approximately 180cm, a height of approximately 165cm, and a bending radius of approximately 90cm.
– A sand lift made from stainless steel with a height of approximately 155cm, equipped with a stainless steel and rubber bucket chain.
– One hexagon platform, halved and featuring three holes, measuring approximately 78x180cm with a height of 40cm.
– Two stainless steel posts.
– One stainless steel sink with a detachable tube.
– One round sieve made from perforated stainless steel with a diameter of approximately 30cm.
– One swiveling cooking pot suspended over a red net made from Hercules rope.
– One HPL wall with a robinia counter.
– One stainless steel scale.
– One round sand chute made from robinia.

All products are proudly made in Germany! The arches are constructed from stainless steel tubes with a diameter of 101.6mm and a thickness of 3mm. The support posts are made from stainless steel tubes with a diameter of 101.6mm and a thickness of 2mm. The visible ends of the posts are securely welded to stainless steel caps. All stainless steel surfaces are treated with glass marbles in accordance with environmental protection regulations. The platform is connected to the support posts using stainless steel press-in threaded sleeves. The platform is fixed in place using concentrically incorporated stainless steel brackets. All wooden parts are made from planed and chamfered robinia wood. They remain untreated. The net is made from Hercules rope with four strands, spliced together. All connecting parts are made from stainless steel or galvanized materials. Only self-locking nuts are used.

Please note that drying cracks are normal in all native hard woods, even after appropriate storage and professional treatment. Therefore, drying cracks do not warrant a claim under warranty. (Refer to the supplementary sheet from the German Institute for Standardization EN 1176, Note on 4.2.7.6)

Download Product Sheet