Dalben Tower (8.50)

-+

-

-

Assembly time
2 fitters 16 hours each, plus lifting gear
(without foundation creation)

-

5.65 m

9.55 m

8.50 m

8.80 m

12.80 m

8.50 m

450.0 kg

2300.00 kg

2.00 m

-

4 pieces - 1.00 x 1.00 x 0.50 m volume: 0.50 m3

3 pieces - 1.00 x 0.40 x 0.40 m volume: 0.16 m3

1 piece - 0.40 x 0.40 x 0.60 m volume: 0.10 m3

-

-

-

2 pers.

16 h

K&K Dalbenturmanlage consisting of: Dalbenturm (8.50) with tunnel slide 30 ° / 36 ° (4.00 m) and net ascent (2.00 m); Post powder-coated red / RAL 2002, tower hood yellow / similar to RAL 1021, with wind chime RAL 2002 Technical data Floor area: 5.65 x 9.55 m Minimum space: 8.80 x 12.80 m (64 m²) Height: 8.50 m + tower end platform heights: 1.00 / 2.00 / 3.00 / 4, 00 m Slide installation height : 4.00 m Sitting height: 4.10 m Slide inclination: 30 ° / 36 ° Slide width: 0.80 m Slide plate thickness: 2.5 mm Weight: 450 kg Heaviest individual part 2300 kg in total Support post steel Ø 193.7 x 4 mm, hot-dip galvanized and powder-coated red / RAL 2002 Platform floors Triangular stainless steel platforms , welded construction with covering made of teardrop plate, glass bead blasted, screwable flange connections on the support posts. Ladder access made of stainless steel tube, rung height 500 mm, including fall protection, between the platforms, glass bead blasted. Protective grille (from 1.00 m platform height) welded construction made of stainless steel tube Ø 21 / 33.7mm, glass bead blasted, from 1.00 m platform height, screwable flange connections on the support posts Tower hood high pressure laminate 15 mm, color yellow / similar to RAL 1021 Wind chimes tower end , color yellow / RAL 1021 Ascent to the platform 2.00 m - Net ascent made of Hercules rope Ø 16 mm, mesh size 300 mx 300 mm (axis dimension) K&K tunnel slide 30 ° / 36 °, Ah 4.00 m slide segments made of stainless steel due to the tunnel shape, particularly low-noise, welded to a one-piece tunnel slide, consisting of the following elements: - 16100 K&K tunnel slide single seat - 16130 K&K tunnel slide shaft - 16166 K&K tunnel slide curve, 8 pieces, 40 ° turn, right - 16116085 K&K tunnel slide straight, length 0.85 m - 16186 K&K tunnel slide outlet Including K&K tunnel slide support post for the curve area, support post made of stainless steel Ø 12 cm, mounting flange made of stainless steel. For your planning, please note that stainless steel slides are oriented to the north-east due to the possible heating of the slide surface or are in the partial shade of trees. Anchoring Dowelling of the circular base with 2 injection anchor rods made of A4 stainless steel. To protect against damage, the tower is equipped with a lightning rod. Foundations (on site) 4 pcs. 1.00 x 1.00 x 0.50 m 3 pcs. 1.00 x 0.40 x 0.40 m 1 pc. 0.40 x 0.40 x 0.60 m Amount of concrete: 2.58 m³ Free fall height 2.00 m

–