Climbing combination

Key Attributes

Age Group


Area of Use

Public Playgrounds



Suitable for

Suitable for
children from 3 years of age,
public playgrounds, etc.
Exercise activities.

Techincal Specifications

Lifting Device


Total Length

3.90 m

Total Width

2.55 m

Total Height

2.45 m

Minimum Space Length

7.40 m

Minimum Space Width

5.55 m

Minimum Space Height

2.45 m

Heaviest Single Piece

75.00 kg

(Total) Weight

495.00 kg

Free Height of Fall

1.15 m

Platform Heights

0.80 m


Foundation 1

10 pieces - 0.40 x 0.40 x 0.40 m volume: 0.07 m3

Foundation 2

1 piece - 0.75 x 0.40 x 0.40 m volume: 0.12 m3

Foundation 3


Foundation 4


Foundation 5


Foundation 6



Number of Installers

2 pers.

Assembly Time

3 h

Assembly Details

Assembly time 2 fitters each 3 hours (without foundation creation)

Technical Data

Technical data
Floor area: 2.55 x 3.90 m
Minimum space: 5.55 x 7.40 m (33 m²)
Total height: 2.45 m
Platform height: 0.80 m
Sitting height: 0.90 m
Weight: 75 kg heaviest individual part
495 kg in total

post Support post made of Robinia plywood, milled cylindrically, Ø 120 mm. Unprotected end grain surfaces are covered with non-detachable post caps made of stainless steel.
Pipe stand made of stainless steel for the foundation and mounting of robinia round wood posts, Ø 120 mm, below the playing level.

floor Platform floor made of boards, 30 mm thick and all-round square timber beams 45 x 100 mm. The dried robinia lumber is planed, chamfered and free from rotten branches. Non-positive floor fastening thanks to special stainless steel brackets with a continuous bolt connection.

Attachment parts
– Robinia wood parapet, 125 x 30 mm, fastening between stainless steel tubes Ø 33.7 x 2 mm
– Panel parapet made of highly weather-resistant HPL laminate board (red), mounting between stainless steel tubes Ø 33.7 x 2 mm
– Panel parapet (3 holes) Weather-resistant HPL laminate board (blue), fastening between stainless steel tubes Ø 33.7 x 2 mm
– Seat: made of highly weather-resistant HPL laminate board (yellow), 20 mm
– Extension stairs with steps made of robinia 160 x 45 mm, screwed onto stainless steel frame Ø 33.7 x 2 mm. Incline height of the steps 133 mm
– banister made of stainless steel pipe, Ø 33.7 x 2 mm, twist-proof
– Add-on trough slide, 0.60 m wide, one-piece stainless steel construction, sheet metal thickness: 2.5 mm, with anti-roll-off fall protection above the single-seat part
– Gable roof, inclination 45 °, made of highly weather-resistant HPL laminate board (brown), 13 mm, attachment to the roof frame made of stainless steel tube Ø 33.7 x 2 mm
– rung made of stainless steel tube, Ø 38 mm, twist-proof

Metal components: stainless steel. The robinia wood is provided with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking. The modular add-on parts introduce their forces directly into the support posts via a special adapter attachment. The screw connections are secured against unauthorized loosening with cover caps.

For your planning, please note that stainless steel slides are oriented to the north-east due to the possible heating of the slide surface or are in the partial shade of trees.

Foundations (on site)
10 pcs. 0.40 x 0.40 x 0.40 m
1 pc. 0.40 x 0.75 x 0.40 m
Amount of concrete: 0.76 m³

Free fall height
1.15 m