Climbing combination

Key Attributes

Age Group


Area of Use

Public Playgrounds



Suitable for

Suitable for
children from 3 years,
public playgrounds, etc.,
exercise activities

Techincal Specifications

Lifting Device


Total Length

9.45 m

Total Width

4.65 m

Total Height

5.40 m

Minimum Space Length

12.45 m

Minimum Space Width

8.15 m

Minimum Space Height

5.40 m

Heaviest Single Piece

75.00 kg

(Total) Weight

1309.50 kg

Free Height of Fall

0.90 m

Platform Heights

0.40 m, 0.20 m, 0.60 m, 0.80 m


Foundation 1

1 piece - 0.75 x 0.40 x 0.40 m volume: 0.12 m3

Foundation 2

2 pieces - 0.70 x 0.30 x 0.40 m volume: 0.09 m3

Foundation 3

25 pieces - 0.40 x 0.40 x 0.40 m volume: 0.07 m3

Foundation 4


Foundation 5


Foundation 6



Number of Installers

2 pers.

Assembly Time

15 h

Assembly Details

Installation time 2 fitters 15 hours each (without foundation preparation), plus lifting gear

Technical Data

Technical data
Floor area: 4.65 x 9.45 m
Minimum space: 8.16 x 12.42 m (68 m²)
Total height: 5.49 m
Platform heights: 0.20 / 0.40 / 0.60 / 0.80 m Slide installation height:
0.80 m
Single seat height: 0.90 m

post Support post made of Robinia plywood, milled cylindrically, Ø 120 mm. Unprotected end grain surfaces are covered with non-detachable post caps made of stainless steel.
Pipe stand made of stainless steel for the foundation and mounting of robinia round wood posts, Ø 120 mm, below the playing level.

floor Platform floor made of boards, 30 mm thick and all-round square timber beams 45 x 100 mm. The dried robinia lumber is planed, chamfered and free from rotten branches. Non-positive floor fastening thanks to special stainless steel brackets with a continuous bolt connection.

Attachment parts
– ramp made of profile boards, 95 x 30 mm
– extension stairs with steps made of robinia 170 x 45 mm, screwed onto stainless steel frame Ø 33.7 x 2 mm. Incline height of the steps 133 mm
– Stair balustrade made of stainless steel
pipe, Ø 33.7 x 2/20 x 2 mm, one-piece welded construction – Step railing made of stainless steel pipe, Ø 33.7 x 2 mm, for stepped platform floors
– Panel balustrade made of highly weather-resistant HPL laminate board ( red)
– wooden parapet made of robinia, 125 x 30 mm. Attachment between stainless steel tubes Ø 33.7 x 2 mm
– gable roof, inclination 45 °, made of highly weather-resistant HPL laminate board (brown), 13 mm, attachment to the roof frame made of stainless steel tube Ø 33.7 x 2 mm
– Tower roof, inclination 75 °, made of colored, highly weather-resistant HPL laminate board (brown), 13 mm
– Tower flag, rotatable
– Seat made of highly weather-resistant HPL laminate board (red), 20 mm

Balcony balustrade made of stainless steel pipe – Add-on trough slide, 0, 60 m wide, one-piece stainless steel construction, sheet metal thickness: 2.5 mm, with anti-roll fall protection above the single-seat part

For your planning, please note that stainless steel slides are oriented to the north-east due to the possible heating of the slide surface or are in the partial shade of trees.

Metal components: stainless steel. The robinia wood is provided with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking. The modular add-on parts introduce their forces directly into the support posts via a special adapter attachment. The screw connections are secured against unauthorized loosening with cover caps.

Foundations (on site)
2 pcs. 0.30 x 0.70 x 0.40 m
25 pieces. 0.40 x 0.40 x 0.40 m
1 pc. 0.40 x 0.75 x 0.40 m
Amount of concrete: 1.89 m³

Free fall height
0.90 m