Climbing combination

-+

-

-

Suitable for
children from 3 years,
public playgrounds, etc.,
exercise activities.

-

5.05 m

3.80 m

4.05 m

8.05 m

7.20 m

4.05 m

70.00 kg

820.00 kg

1.55 m

0.20 m, 0.40 m, 0.60 m, 0.80 m

14 pieces - 0.40 x 0.40 x 0.40 m volume: 0.07 m3

2 pieces - 0.30 x 0.30 x 0.40 m volume: 0.04 m3

1 piece - 0.75 x 0.40 x 0.40 m volume: 0.12 m3

-

-

-

2 pers.

8 h

Assembly time 2 fitters 8 hours each (without foundation creation)

Specifications
Overall height: 4.05 m
Surface area: 3.80 x 5.05 m
minimum area: 7.20 x 8.05 m (43 meters)
platform height: 0.20 to 0.80 m
slipping attachment height: 0.80 m
slides a seat height: 0.90 m
Weight: 70 kg heaviest single part
820 kg in total

Support
post Support post made of Robinia plywood, milled cylindrically, Ø 120 mm. Unprotected end grain surfaces are covered with non-detachable post caps made of stainless steel.
Pipe stand made of stainless steel for the foundation and mounting of robinia round wood posts, Ø 120 mm, below the playing level.

Platform
floor Platform floor made of boards, 30 mm thick and all-round square timber beams 45 x 100 mm. The dried robinia lumber is planed, chamfered and free from rotten branches. Non-positive floor fastening thanks to special stainless steel brackets with a continuous bolt connection.

Attachment parts – Upright railing, anti-roll-off, made of stainless steel tube, Ø 33.7 x 2 mm
– Step railing, made of stainless steel tube, Ø 33.7 x 2 mm, for stepped platform floors
– Wooden balustrade made of robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33, 7 x 2 mm
– panel parapet made of highly weather-resistant HPL laminate board (red), fastening between stainless steel tubes Ø 33.7 x 2 mm
– slide rule with elements made of polyamide, Ø 80 mm, on axles made of welded stainless steel tube, Ø 20 mm
– wheel of fortune wall made of HPL Laminate board
– extension staircase with steps made of robinia 170 x 45 mm, screwed onto stainless steel frame Ø 33.7 x 2 mm, height of the steps 133 mm
– stair parapet made of robinia, fastening between stainless steel tubes, Ø 33.7 x 2 mm
– climbing wall made of robinia wood with attached climbing elements made of HPL laminate
board – crawl tunnel, Ø 56 cm, stainless steel sheet 2.5 mm
– tower roof, inclination 80 °, made of highly weather-resistant HPL – Laminate board (royal blue), 13 mm
–
Tower flag, corrugated – Add-on trough slide, 0.60 m wide, one-piece stainless steel construction, sheet metal thickness 2.5 mm, with anti-roll protection against falling over the seat part

For your planning, please note that stainless steel slides are oriented to the north-east due to the possible heating of the slide surface or are in the partial shade of trees.

Metal components: stainless steel. The robinia wood is provided with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking. The modular add-on parts introduce their forces directly into the support posts via a special adapter attachment. The screw connections are secured against unauthorized loosening with cover caps.

Foundations (on site)
14 pcs. 0.40 x 0.40 x 0.40 m
2 pieces. 0.30 x 0.30 x 0.40 m
1 pc. 0.40 x 0.75 x 0.40 m
amount of concrete: 1.09 m³

Free fall height
1.55 m