Climbing combination

3+

Public Playgrounds

Slide

Suitable for
children from 3 years,
public playgrounds, etc.,
exercise activities

Y

5.70 m

4.90 m

3.60 m

8.90 m

8.30 m

3.60 m

85.00 kg

830.00 kg

1.90 m

0.20 m, 0.40 m, 0.60 m, 0.80 m, 1.00 m, 1.20 m

2 pieces - 0.30 x 0.30 x 0.40 m volume: 0.04 m3

13 pieces - 0.40 x 0.40 x 0.40 m volume: 0.07 m3

1 piece - 0.75 x 0.40 x 0.40 m volume: 0.12 m3

-

-

-

2 pers.

11 h

Installation time 2 fitters 11 hours each (without foundation preparation), plus lifting gear

Technical data
Floor area: 4.90 x 5.70 m
Minimum space: 8.30 x 8.90 m (48 m²)
Total height: 3.60 m
Platform heights: 0.20 / 0.40 / 0.60 / 0.80 / 1.00 / 1.20 m
Slide
single
seat height: 1.30 m Weight: 85 kg Heaviest single part 830 kg in total

Support
post Support post made of Robinia plywood, milled cylindrically, Ø 120 mm. Unprotected end grain surfaces are covered with non-detachable post caps made of stainless steel.
Pipe stand made of stainless steel for the foundation and mounting of robinia round wood posts, Ø 120 mm, below the playing level.

Platform
floor Platform floor made of boards, 30 mm thick and all-round square timber beams 45 x 100 mm. The dried robinia lumber is planed, chamfered and free from rotten branches. Non-positive floor fastening thanks to special stainless steel brackets with a continuous bolt connection.

Attachments
– wooden parapet made of robinia, 125 x 30 mm. Fixing between stainless steel tubes Ø 33.7 x 2 mm.
– Step railing made of stainless steel tube, Ø 33.7 x 2 mm, for stepped platform floors.
– Tandem railing made of stainless steel tube, Ø 33.7 x 2 mm.
– Tent roof, inclination 45 °, made of highly weather-resistant HPL laminate (brown), 13 mm. Attachment to the roof frame made of stainless steel
tube Ø 33.7 x 2 mm.
– Crawl tunnel: Ø 56 cm, stainless steel sheet 2.5 mm.
– Climbing wall made of robinia wood with attached climbing elements made of HPL laminate board.
– Add-on trough slide, 0.60 m wide, one-piece stainless steel construction, sheet thickness: 2.5 mm, with anti-roll-off fall protection above the seat part

For your planning, please note that stainless steel slides are oriented to the north-east due to the possible heating of the slide surface or are in the partial shade of trees.

Metal components: stainless steel. The robinia wood is provided with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking. The modular add-on parts introduce their forces directly into the support posts via a special adapter attachment. The screw connections are secured against unauthorized loosening with cover caps.

Foundations (on site)
2 pcs. 0.30 x 0.30 x 0.40 m
13 pieces. 0.40 x 0.40 x 0.40 m
1 pc. 0.40 x 0.75 x 0.40 m
amount of concrete: 1.02 m³

Free fall height
1.90 m