“Calisthenics Augustin II”

“Calisthenics Augustin II”

Calisthenics by Augustin II
Order Number: 7S-200911-26-GA
Stainless steel posts:

– 8 stainless steel posts with a diameter of 101.6mm
– 2 stainless steel posts in grassArtdesign, curved with bevel cut
– 4 stainless steel bars, with heights of 130cm and 210cm
– 1 pull-up bar made of stainless steel
– 1 stainless steel wall bars
– 1 wide bow, approximately 350cm in length, made of stainless steel
– 3 stainless steel push-up bars

Other equipment included:

– 1 running rope and 1 tether made of Hercules rope
– 2 outwardly inclined stainless steel posts in grassArtdesign, curved with bevel cut, thick-walled
– 1 hammock made of close-meshed Hercules dew net, approximately 395x90cm
– 2 square timbers
– 2 high-strength chain swivels
– 2 vibration limiters
– Sticker with training instructions included, to be attached on-site to the post of the respective training element (if tested according to DIN EN 16630)

Color design not included.

Made in Germany!
All support posts are made of stainless steel with a diameter of 101.6mm.
The visible ends of the posts are conclusively welded to a stainless steel cap.
All wooden parts are made of Robinia, planed and chamfered. They are untreated.
The connection point between the net/rope and support posts is made through a specifically formed stainless steel fork and tensible stainless steel chain.
All ropes/nets are made of Hercules rope. (Different color nuances may occur when using hemp-colored ropes)
All connecting parts are made of stainless steel or galvanized. Only self-locking nuts are used.

Drying cracks are normal in all native hardwoods, even after appropriate storage and professional treatment. Therefore, drying cracks do not justify a warranty claim. (Refer to the supplementary sheet to the German Institute for Standardization EN 1176, Note on 4.2.7.6)

Download Product Sheet