Play Combination “Ahnenweg II”

Play Combination “Ahnenweg II”

Play Combination “Ahnenweg II”
Order Number: SK-200723-01
Material: Stainless steel posts and Robinia wood

– 1 large playhouse
– 4 stainless steel posts
– 2 climbing walls made of Robinia with synthetic resin climbing grips
– 2 windows
– 1 platform measuring 200x200cm, height 140cm
– 1 Spiel-Bau slide, box-shaped, made of stainless steel, height 140cm
– Several synthetic resin climbing grips
– 1 large-meshed net made of Hercules rope, measuring 200x200cm, height 200cm
– 1 climbing net from height 140cm to height 200cm
– 3 stainless steel chain climbing ropes
– 1 table with 2 stainless steel plates and posts
– 1 playshelf
– 1 platform measuring approximately 100x100cm, height 140cm
– 1 stainless steel rope ladder with one bar
– 1 stainless steel ladder
– Several stainless steel, Robinia, and HPL balustrades
– Several colored accents
– 1 tunnel with an opening of approximately 75x75cm and a length of approximately 400cm, connecting the 2 playhouses
– Approximately 17 openings made of colored plexiglass
– 2 stainless steel posts
– 1 small playhouse
– 4 stainless steel posts
– 4 walls made of Robinia and HPL, with 2 of them attached to the ground
– 2 windows
– 1 door
– 1 net made of Hercules rope, measuring 127x127cm, height 55cm
– Several synthetic resin climbing grips
– 1 triangular platform measuring 127x127cm, height 140cm
– Several colored accents

Without color design

There is an approximate height difference of 32-34cm between the playhouses.

Made in Germany!
All support posts are made of stainless steel tubes with a diameter of 101.6mm.
The visible ends of the posts are conclusively welded to stainless steel caps.
All stainless steel surfaces are radiated with glass marbles in accordance with environmental protection regulations.
The platform is connected to the support posts through stainless steel press-in threaded sleeves.
The platform is fixed using concentrically incorporated stainless steel brackets.
All wooden parts are made of planed and chamfered Robinia wood. They are untreated.
The railing/support post connections are made through countersunk diagonal holes and stainless steel screws with special key head-theft protection.
The net/rope is connected to the support posts through specifically formed stainless steel forks and tensible stainless steel chains.
The nets are made of Hercules rope.
All connecting parts are made of stainless steel or galvanized. Only self-locking nuts are used.

Drying cracks are normal in all native hardwoods, even after appropriate storage and professional treatment. Therefore, drying cracks do not justify a warranty claim. (Refer to the supplementary sheet to the German Institute for Standardization EN 1176, Note on 4.2.7.6)

Download Product Sheet