Kobito sand kitchen “Yuka”

Kobito sand kitchen “Yuka”

Kobito Sand Kitchen Yuka
An arch constructed from stainless steel and wood: robinia.

– One stainless steel arch, approximately 180cm wide and 165cm tall, with a bending radius of around 90cm.
– A stainless steel sand lift, standing at approximately 155cm in height, equipped with a stainless steel and rubber bucket chain.
– Six stainless steel posts.
– A hexagon platform, halved, featuring an opening and two holes, measuring approximately 78x180cm with a PH of 50cm.
– A stainless steel sink with a detachable tube.
– A swiveling cooking pot suspended over a red net made of Hercules rope.
– Another hexagon platform, halved, with an opening and hole, measuring approximately 78x180cm with a PH of 30cm.
– A stainless steel libra.
– A round sieve, approximately 30cm in diameter, made of perforated stainless steel.
– Two HPL-walls with robinia counters.

All products are proudly made in Germany!
All arches are constructed from stainless steel tubes, with a diameter of 101.6mm and a thickness of 3mm. The support posts are made from stainless steel tubes, with a diameter of 101.6mm and a thickness of 2mm.
The visible ends of the posts are securely welded to stainless steel caps.
All stainless steel surfaces are treated with glass marbles in accordance with environmental protection regulations.
The platform is connected to the support posts using stainless steel press-in threaded sleeves.
The platform is fixed in place using concentrically incorporated stainless steel brackets.
All wooden parts are made from planed and chamfered robinia. They are left untreated.
The net is made from Hercules rope with four strands, spliced together.
All connecting parts are made from stainless steel or galvanized materials. Only self-locking nuts are used.

Please note that drying cracks are normal in all native hard woods, even after appropriate storage and professional treatment. Therefore, drying cracks do not warrant a claim under warranty. (Please refer to the supplementary sheet from the German Institute for Standardization EN 1176, Note on 4.2.7.6)

Download Product Sheet