“Grass Cabin Ilse”
Grass cabin – Ilse
Order Number: 2S-170630-42
Posts made of stainless steel
– One square stage with inclined support posts made of stainless steel and a roof made of three small HPL elements. The platform height (PH) is 100cm.
– One square stage with inclined support posts. The platform height (PH) is 80cm.
– One half gable with a window.
– One slide made of stainless steel, box-shaped, without a seat piece. The platform height (PH) is 100cm.
– One rope bridge with steps made of robinia.
– One chicken ladder with a safety rope made of Hercules rope attached to a single support post made of stainless steel.
– One turnable sand crane with a sand pulley and a rubber bucket.
– Sand trap.
– Several balustrades and handrails in a leaf design.
– Four curved support posts made of stainless steel, three of them with bulrush made of stainless steel.
Without color design.
Made in Germany!
All support posts are made of stainless steel tubes with a diameter of 101.6mm.
The visible ends of the posts are conclusively welded to a stainless steel cap.
All stainless steel surfaces are radiated with glass marbles according to environmental protection rules.
All wooden parts are made of Robinia, planed and chamfered. All wooden parts are untreated.
The connection between the platform/railing and support posts is made through stainless steel press-in threaded sleeves.
The platform is fixed using concentrically incorporated stainless steel brackets.
The connection point between the net/rope and support posts is made through a specifically formed stainless steel fork and a tensible stainless steel chain.
The nets are made of Hercules rope. (Different color nuances may occur when using hemp-colored ropes)
All connecting parts are made of stainless steel or galvanized. Only self-locking nuts are used.
Drying cracks are normal in all native hardwoods, even after appropriate storage and professional treatment. Therefore, drying cracks do not justify a warranty claim. (Refer to the supplementary sheet to the German Institute for Standardization EN 1176, Note on 126.96.36.199)
600 x 764 cm
Fall Height Group
stainless steel, wood, HPL