Climbing combination

4+

Public Playgrounds

Slide

Suitable for
children from 4 years,
public playgrounds, etc.,
exercise activities

-

6.35 m

4.30 m

2.75 m

9.85 m

7.30 m

2.75 m

85.00 kg

935.00 kg

1.70 m

0.80 m, 1.00 m, 1.20 m

2 pieces - 0.30 x 0.30 x 0.40 m volume: 0.04 m3

17 pieces - 0.40 x 0.40 x 0.40 m volume: 0.07 m3

1 piece - 0.75 x 0.40 x 0.40 m volume: 0.12 m3

-

-

-

2 pers.

10 h

Assembly time 2 fitters 10 hours each (without foundation creation)

Technical data
Floor area: 4.30 x 6.35 m
Minimum space: 7.30 x 9.85 m (47 m²)
Total height: 2.75 m
Platform heights: 0.80 / 1.00 / 1.20 m Slide seat height
: 1, 30 m
slide inclination: 36 °
slide width: 0.60 m
thickness of slide plate: 2.5 mm
weight: 85 kg heaviest single part
935 kg in total

Support
post Support post made of Robinia plywood, milled cylindrically, Ø 120 mm. Unprotected end grain surfaces are covered with non-detachable post caps made of stainless steel.
Pipe stand made of stainless steel for the foundation and mounting of robinia round wood posts, Ø 120 mm, below the playing level.

Platform
floor Platform floor made of boards, 30 mm thick and all-round square timber beams 45 x 100 mm. The dried robinia lumber is planed, chamfered and free from rotten branches. Non-positive floor fastening thanks to special stainless steel brackets with a continuous bolt connection.

Attachments
– wooden parapet made of robinia, 125 x 30 mm. Fastening between stainless steel tubes Ø 33.7 x 2 mm
– U-rail, anti-roll, made of stainless steel tube, Ø 33.7 x 2 mm – Access rail, anti-roll, made of stainless steel
tube, Ø 33.7 x 2 mm, consisting of horizontal railing tube and parapet tubes arranged vertically on both sides
– Gable roof, inclination 45 °, made of highly weather-resistant HPL laminate board (brown), 13 mm, attachment to the roof frame made of stainless steel tube Ø 33.7 x 2 mm
– Extension stairs with steps made of robinia 170 x 45 mm, screwed onto stainless steel frame Ø 33 , 7 x 2 mm. Inclination height of the steps 133 mm
– stair balustrade made of robinia wood, fastened between stainless steel tubes Ø 33.7 x 2 mm
– Seat: made of highly weather-resistant HPL laminate board (red), 20 mm
– climbing
rungs (cranked) made of stainless steel tube , Ø 33.7 mm – crawl tunnel: Ø 56 cm, stainless steel
sheet 2.5 mm – climbing wall made of robinia wood with attached climbing elements made of HPL laminate
– slide bedway, 0.60 m wide, one-piece stainless steel construction, sheet thickness: 2.5 mm, with abrollverhindernder fall protection over a seat part

For your planning, please note that stainless steel slides are oriented to the north-east due to the possible heating of the slide surface or are in the partial shade of trees.

Metal components: stainless steel The robinia wood is provided with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking. The modular add-on parts introduce their forces directly into the support posts via a special adapter attachment. The screw connections are secured against unauthorized loosening with cover caps.

Foundations (on site)
2 pcs. 0.30 x 0.30 x 0.40 m
17 pieces. 0.40 x 0.40 x 0.40 m
1 pc. 0.40 x 0.75 x 0.40 m
Amount of concrete: 1.28 m³

Free fall height
1.70 m