Climbing combination

3+

Public Playgrounds

Slide

Suitable for
children from 3 years,
public playgrounds, etc.,
exercise activities

-

3.90 m

2.15 m

2.50 m

7.40 m

5.15 m

2.50 m

75.00 kg

410.00 kg

1.00 m

0.80 m, 1.00 m

8 pieces - 0.40 x 0.40 x 0.40 m volume: 0.07 m3

1 piece - 0.75 x 0.40 x 0.40 m volume: 0.12 m3

-

-

-

-

2 pers.

3 h

Assembly time 2 fitters each 3 hours (without foundation creation)

Technical data
Total height: 2.50 m
Base area: 2.15 x 3.90 m
Minimum space: 5.15 x 7.40 m (27 m²)
Platform height: 0.80 / 1.00
m
Slide installation height: 0.80 m Sitting height: 0.90 m
Weight: 75 kg heaviest single part
410 kg in total

Support
post Support post made of Robinia plywood, milled cylindrically, Ø 120 mm. Unprotected end grain surfaces are covered with non-detachable post caps made of stainless steel.
Pipe stand made of stainless steel for the foundation and mounting of robinia round wood posts, Ø 120 mm, below the playing level.

Platform
floor Platform floor made of boards, 30 mm thick and all-round square timber beams 45 x 100 mm. The dried robinia lumber is planed, chamfered and free from rotten branches. Non-positive floor fastening thanks to special stainless steel brackets with a continuous bolt connection.

Attachment parts
– wooden parapet made of robinia, 125 x 30 mm, fastening between stainless steel pipes Ø 33.7 x 2 mm
– balcony balustrade made of stainless steel pipe
– extension stairs with steps made of robinia 170 x 45 mm, screwed onto stainless steel frame Ø 33.7 x 2 mm, incline height of steps 133 mm
– stair parapet made of stainless steel tube, Ø 33.7 x 2/20 x 2 mm, one-piece welded construction
– awning made of highly weather-resistant HPL laminate board (red), 15 mm
– table made of highly weather-resistant HPL laminate board (yellow), 15 mm
– gable roof, inclination 45 °, made of highly weather-resistant HPL laminate (brown), 13 mm, attachment to the roof frame made of stainless steel tube Ø 33.7 x 2 mm
– Add-on trough slide, 0.60 m wide, one-piece stainless steel construction, sheet thickness: 2.5 mm, with anti-roll-off fall protection above the seat part

For your planning, please note that stainless steel slides are oriented to the north-east due to the possible heating of the slide surface or are in the partial shade of trees.

Metal components: stainless steel. The robinia wood is provided with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking. The modular add-on parts introduce their forces directly into the support posts via a special adapter attachment. The screw connections are secured against unauthorized loosening with cover caps.

Foundations (on site)
8 pcs. 0.40 x 0.40 x 0.40 m
1 pc. 0.40 x 0.75 x 0.40 m
Amount of concrete: 0.63 m³

Free fall height
1.00 m