Climbing combination

Key Attributes

Age Group


Area of Use

Public Playgrounds



Suitable for

Suitable for
children from 5 years of age,
public playgrounds, etc.
Exercise activities.

Techincal Specifications

Lifting Device


Total Length

7.00 m

Total Width

2.95 m

Total Height

3.65 m

Minimum Space Length

10.50 m

Minimum Space Width

6.00 m

Minimum Space Height

3.65 m

Heaviest Single Piece

105.00 kg

(Total) Weight

610.00 kg

Free Height of Fall

2.50 m

Platform Heights

1.80 m


Foundation 1

3 pieces - 0.30 x 0.30 x 0.40 m volume: 0.04 m3

Foundation 2

8 pieces - 0.40 x 0.40 x 0.40 m volume: 0.07 m3

Foundation 3

1 piece - 0.75 x 0.40 x 0.40 m volume: 0.12 m3

Foundation 4


Foundation 5


Foundation 6



Number of Installers

2 pers.

Assembly Time

6 h

Assembly Details

Installation time 2 fitters 6 hours each (without foundation creation)

Technical Data

Technical data
Total height: 3.65 m
Base area: 2.95 x 7.00 m
Minimum space: 6.00
x 10.50 m (46 m²)
Platform height: 1.40 /
1.80 m
Slide installation height: 1.80 m Sitting height: 1.90 m
Weight: 105 kg heaviest single part
610 kg in total

posts Support posts made of stainless steel tube Ø 120 mm covered with non-detachable post caps made of stainless steel.

floor Platform floor made of boards, 30 mm thick and all-round square timber beams 45 x 100 mm. The dried robinia lumber is planed, chamfered and free from rotten branches. Non-positive floor fastening thanks to special stainless steel brackets with a continuous bolt connection.

Attachment parts – Arch ladder made of stainless steel pipe
– Vertical climbing pole made of stainless steel pipe , Ø 38 mm
– Upright railing, anti-roll-off, made of stainless steel pipe, Ø 33.7 x 2 mm
– Panel balustrade made of colored, highly weather-resistant HPL laminate board. Fastening between stainless steel
pipes Ø 33.7 x 2 mm – crawl tunnel: Ø 56 cm, stainless steel sheet 2.5 mm
– gable roof, inclination 45 °, made of blue, highly weather-resistant HPL laminate board, 13 mm. Fastening to the roof frame made of stainless steel tube Ø 33.7 x 2 mm
– seat made of colored, highly weather-resistant HPL laminate board (red), 20 mm
– table made of colored, highly weather-resistant HPL laminate board (red), 15 mm
– Add-on trough slide, 0.60 m wide, one-piece stainless steel construction, sheet thickness: 2.5 mm, with anti-roll-off fall protection above the seat part

For your planning, please note that stainless steel slides are oriented to the north-east due to the possible heating of the slide surface or are in the partial shade of trees.

Metal components: stainless steel. The robinia wood is provided with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking.
The modular add-on parts introduce their forces directly into the support posts via a special adapter attachment. The screw connections are secured against unauthorized loosening.

Foundations (on site)
3 pcs. 0.30 x 0.30 x 0.40 m
8 pcs. 0.40 x 0.40 x 0.40 m
1 pc. 0.40 x 0.75 x 0.40 m
Amount of concrete: 0.74 m³

Free fall height
2.50 m