Climbing combination

Key Attributes

Age Group


Area of Use

Public Playgrounds



Suitable for

Suitable for
children from 3 years of age,
public playgrounds, etc.
Exercise activities.

Techincal Specifications

Lifting Device


Total Length

4.82 m

Total Width

3.80 m

Total Height

2.17 m

Minimum Space Length

7.82 m

Minimum Space Width

7.17 m

Minimum Space Height

2.17 m

Heaviest Single Piece

75.00 kg

(Total) Weight

480.00 kg

Free Height of Fall

1.32 m

Platform Heights

0.60 m, 0.80 m, 1.00 m, 1.20 m


Foundation 1

2 pieces - 0.30 x 0.30 x 0.40 m volume: 0.04 m3

Foundation 2

1 piece - 0.75 x 0.40 x 0.40 m volume: 0.12 m3

Foundation 3


Foundation 4


Foundation 5


Foundation 6



Number of Installers

2 pers.

Assembly Time

4 h

Assembly Details

Assembly time 2 fitters each 4 hours (without foundation creation)

Technical Data

Technical data
Equipment room: 4.82 x 3.80 x 2.17 m
Minimum space: 7.82 x 7.17 x 2.17 m
Platform heights: 0.60 m /
0.80 m
Slide installation height: 0.80 m Seat height: 0 , 90 m
total height: 2.17 m
free fall height: 1.32 m
impact area: 35 m²
weight: 70 kg heaviest single part
720 kg in total

posts Support posts made of stainless steel Ø 120 mm covered with non-detachable post caps made of stainless steel.

floor Platform floor made of boards, 30 mm thick and all-round square timber beams 45 x 100 mm. The dried robinia lumber is planed, chamfered and free from rotten branches. Non-positive floor fastening thanks to special stainless steel brackets with a continuous bolt connection.

Attachment parts
– Panel parapet made of highly weather-resistant HPL laminate board (red / yellow), fastening between stainless steel
pipes Ø 33.7 x 2 mm – Access railing, preventing roll-off, welded construction made of stainless steel pipe, Ø 33.7 x 2 mm, consisting of horizontal railing tube with curved, vertically arranged retaining tubes
– climbing rungs made of stainless steel tube , Ø 38 mm, twist-proof
– seat plate made of colored, highly weather-resistant HPL laminate board, 20 mm
– slide rule with elements made of polyamide, Ø 80 mm, on axles made of welded stainless steel tube, Ø 20 mm
– wheel of fortune wall made of HPL Laminate board
– ramp barrier-free 14 °, tread made of profiled boards, 95 x 30 mm
– Gable roof, inclination 45 °, made of colored, highly weather-resistant HPL laminate board, 13 mm, attachment to the roof frame made of stainless steel
tube Ø 33.7 x 2 mm – Add-on trough slide, 0.60 m wide, one-piece stainless steel construction, sheet thickness: 2.5 mm, with anti-roll-off fall protection above the seat part

For your planning, please note that stainless steel slides are oriented to the north-east due to the possible heating of the slide surface or are in the partial shade of trees.

The robinia wood is provided with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking. The modular add-on parts introduce their forces directly into the support posts via a special adapter attachment. The screw connections are secured against unauthorized loosening by using screws with a central pin.

Foundations (on site)
7 pcs. 0.40 x 0.40 x 0.40 m
2 pieces. 0.30 x 0.30 x 0.40 m
1 pc. 0.40 x 0.75 x 0.40 m
Amount of concrete: 0.64 m³