Climbing combination

5+

Public Playgrounds

Slide

Suitable for
children from 5 years,
public playgrounds etc.,
physical activities

Y

17.20 m

13.55 m

8.05 m

19.80 m

16.70 m

8.05 m

880.00 kg

6800.00 kg

2.00 m

0.60 m, 0.80 m, 1.00 m, 1.20 m, 1.40 m, 1.60 m, 1.80 m, 2.00 m, 2.20 m, 2.40 m, 2.60 m, 2.80 m, 3.00 m, 3.20 m, 3.40 m, 3.60 m, 3.80 m, 4.00 m

61 pieces - 0.40 x 0.40 x 0.40 m volume: 0.07 m3

1 piece - 0.60 x 0.60 x 0.60 m volume: 0.22 m3

1 piece - 1.00 x 0.60 x 0.50 m volume: 0.24 m3

1 piece - 0.80 x 0.80 x 1.00 m volume: 0.64 m3

3 pieces - 1.00 x 0.40 x 0.40 m volume: 0.16 m3

1 piece - 1.40 x 0.75 x 0.40 m volume: 0.42 m3

4 pers.

40 h

Assembly time 4 fitters each 40 hours, plus lifting gear (without foundation creation)

Technical data
Floor area: 13.55 x 17.20 m
Minimum space: 16.70 x 19.80 m (179 m²)
Total height: 8.05 m
Platform height: 0.60 to 4.00 m
Sitting height: 4.10 m
Weight: 880 kg heaviest single part
6800 kg in total

Support
posts Support posts made of stainless steel tube Ø 120 mm covered with non-detachable post caps made of stainless steel.

Platform
floor Platform floor made of boards, 30 mm thick and all-round square timber beams 45 x 100 mm. The dried robinia lumber is planed, chamfered and free from rotten branches. Non-positive floor fastening thanks to special stainless steel brackets with a continuous bolt connection.

Attachment parts
– wooden parapet made of robinia, 120 x 30 mm. Fastening between stainless steel tubes Ø 33.7 x 2 mm
– lattice balustrade made of stainless steel
tube, Ø 33.7 x 2/25 x 2 mm, one-piece welded construction – step railing made of stainless steel tube, Ø 33.7 x 2 mm, for stepped platform floors
– iron railing, anti-roll-off , made of stainless steel tube, Ø 33.7 x 2 mm
– climbing
rungs made of stainless steel tube , Ø 38 mm, twist- proof – suspension bridge made of running wood 45 x 100 mm with spacer blocks made of hard rubber 30 mm, stainless steel carrying ropes Ø 10 mm with 4 tensioning devices, delicate handrail chains made of stainless steel
– Footbridge: V-shaped net construction made of Herkules rope, catwalk made of wooden rungs with approx. 40 mm
clear rung spacing , attachment to steel frame construction, parapet height approx. 0.75 m – Net tunnel: Tunnel-shaped net construction made of Hercules rope, mesh size approx. 125 x 125 mm (running surface) or approx. 260 x 260 mm (side and roof surface), attachment to stainless steel frame
– tower roof, inclination 72 °, made of highly weather-resistant HPL laminate
board (royal blue), 13 mm, with rotating flag – trapezoidal pent roof, made of Highly weather-resistant HPL laminate board (royal blue), 13 mm, attachment to the roof frame made of stainless steel tube Ø 33.7 x 2 mm

K&K tunnel spiral slide, installation
height: 4.00 m,
single seat height: 4.10 m,
slide inclination: 30 ° / 38 °
spiral (right): 280 °
tunnel diameter: 0.80 m,
slide plate thickness : 2.5 mm

Slide segments made of stainless steel, especially low-noise due to the tunnel shape, welded to a three-part slide, which is coiled around a central pylon for transport reasons, including the corresponding connecting flanges to facilitate on-site assembly.

– 41540002 K&K landslide tunnel
seat – 16140S K&K tunnel
slide shaft – 16155 K&K tunnel slide screws, 14 pieces, spiral right 280 °
– 16148S K&K tunnel
slide shaft – 16180006 K&K tunnel slide outlet

K&K tunnel landslide installation
height: 4.00 m
seat height: 4.10 m
slide inclination: 30 °
slide plate thickness : 2.5 mm
slide width: 0.60 / 0.80 m

Slide segments made of stainless steel are particularly quiet thanks to the tunnel or trough shape, welded to a one-piece slide, consisting of the following elements:

– 41540001 K&K landslide
single seat – 16110 K&K tunnel
slide straight – 16170 K&K tunnel slide curves, 7 pieces, 35 ° turn, left
– 16110S K&K tunnel slide straight, length 0.50 m
– 41590 K&K landslide tunnel
adapter – 41550S K&K landslide – Straight, length 0.50 m
– 41660 K&K landslide outlet

Including K&K landslide support posts for the curve area, support posts made of stainless steel Ø 120 mm, mounting flange made of stainless steel.

Metal components: stainless steel. The robinia wood is provided with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking.
The modular add-on parts introduce their forces
directly into the support posts via a special adapter attachment . The screw connections are secured against unauthorized loosening.

For your planning, please note that stainless steel slides are oriented to the north-east due to the possible heating of the slide surface or are in the partial shade of trees.

Foundations (provided by customer)
61 pcs. 0.40 x 0.40 x 0.40 m
1 pc. 0.60 x 0.60 x 0.60 m
5 pieces. 0.60 x 1.00 x 0.50 m
1 pc. 0.80 x 0.80 x 1.00 m
3 pcs. 1.00 x 0.40 x 0.40 m
1 pc. 1.40 x 0.75 x 0.40 m
amount of concrete: 6.74 m³

Statics, test statics and building permit:
If separate statics, test statics or a building permit are required for the installation of the device, please inform us in good time before placing the order so that we can provide the necessary documents in good time before installation.
The documents are created by a recognized engineering office. The resulting costs are to be borne by the client.

Free fall height
2.00 m