Balance Way Lake III
Balance Way Lake III
Order Number: 7S-200702-10
Posts made of stainless steel
Wood: Robinia
– 19 stainless steel posts, diameter 101.6 mm, length approximately 200-300 cm
– 1 Spiel-Bau Slide, height 150 cm
– 1 stainless steel archladder
– 1 climbing net made of Hercules rope, with large mesh
– 1 trap consisting of 3 stainless steel rings and 2 net tunnels made of Hercules rope, length 100 cm, with small mesh
– 1 rope ascent made of Hercules rope
– 3 balance and safety ropes, length approximately 100 cm, 120 cm, and 200 cm
– 1 climbing wall made of HPL, with synthetic resin holding grips
– 1 balance and safety rope, length approximately 200 cm
– 1 triangular podium, dimensions 90x90x90 cm, height 130 cm
– 1 stainless steel bar
– 1 stainless steel climbing pole, height 130 cm
– 1 balance beam with safety rope made of Hercules rope
– 2 handrails
– 1 square net made of Hercules rope, with large mesh
Stainless steel posts do not come with color design.
Made in Germany!
All support posts are made of stainless steel tubes with a diameter of 101.6 mm.
The visible ends of the posts are welded securely to stainless steel caps.
All stainless steel surfaces are treated with glass marbles in accordance with environmental protection regulations.
All wooden parts are made of Robinia, planed and chamfered. They are left untreated.
The connection between the platform/railing and the support posts is achieved through stainless steel press-in threaded sleeves.
The platform is fixed using concentrically incorporated stainless steel brackets.
The connection point between the net/rope and the support posts is made through specifically formed stainless steel forks and tensile stainless steel chains.
The nets are made of Hercules rope.
All connecting parts are made of stainless steel or galvanized. Only self-locking nuts are used.
Drying cracks are normal in all native hardwoods, even after appropriate storage and professional treatment. Therefore, drying cracks do not qualify for a warranty claim. (Refer to the supplementary sheet of the German Institute for Standardization EN 1176, Note on 4.2.7.6)
Technical Information
Area
ca. 750 x 1570 cm
Fall Height Group
260 cm
Materials
Material
stainless steel, wood, HPL